SnapTrack® Metal Channel for ASAHOM Permanent Lights

Each Track comes with 2 pieces:

TRACK A: A flat track for attaching to your soffits with screws.

TRACK B: A squared track that connects onto Track A with a simple snap. Track B is where you simply pop your ASAHOM Lights into place at each hole opening.

Step 1: Identify where along your SOFFITS you would like to start installation.

Step 2: Measure HOW FAR FROM WALL you would like to install. We Recommend 2-3 inches from your wall. The farther you go, the more rounded the lights will be. We recommend using a chalk line to mark large areas so you don't have to measure for each track.

Step 3: Place the end of TRACK A on the section of SOFFIT you would like to begin install. Use screws or nail gun to screw/nail the track into your Soffits.
*NOTE* Most homes have wood planks that protrude from the soffits. These tracks are specifically designed to overcome this problem. Make sure you are installing to top of these wood planks.

Step 4: Click your first Strand of lights into TRACK B before installing TRACK B. You should hear an audible "CLICK" sound, and the bulbs should slightly protrude through the hole openings on TRACK B.

Step 5: Simply snap TRACK B onto TRACK A .

Step 6: Repeat these steps along your entire roofline.